While exceptionally good drives, Western Digital, like all other hard drives,
occasionally fail. Sometimes these failures can be due to read/write head
problems or service track corruption. Usually this damage occurs due to
improper cooling, allowing the drive to reach temperatures above its maximum
recommended operating temperature. Often when there are head or microcode
issues, the drive will either make a clicking noise, or display the wrong
drive size at POST. For instance, you might see “Western Digital 120 GB
WDAC1200BB,” instead of “Western Digital Caviar 60 GBWDAC600BB.” This is
a sign that the heads or microcode have failed, but it is still a completely
recoverable condition in most circumstances. If the drive is clicking, it
is important to turn it off immediately. This can damage the platter media
over time. If you have a failing Western Digital hard drive, and would like
more information about how we can help you, please call us at
1.800.237.4200.
Please keep in mind that hard drives are delicate instruments. Like any
other delicate instrument, if they are not handled with care or properly
cooled, you may experience a failure. Hard drives are sensitive to heat,
rapid temperature changes, static electricity, power surges and physical
shock. We estimate that most hard drive failures occur due to operating
conditions, not manufacture defects.
Datarecovery.com, Inc. is a Western Digital Service and Support Platinum
Partner for data recovery. We have been authorized by WDC to open and
recover data from WD hard drives without affecting your warranty.
*Western Digital is a registered trademark of Western Digital Corporation
